HCR-200 high pressure common rail injector test bench

Description:

Test bench HCR-200
1.Output power:5.5kw
2.Voltage:380V, 50/60Hz
3.1000*850*1430mm
4. Weight:400kg

HCR-200 high pressure common rail injector test bench isan special equipment developed by BEST LTD to test high pressurecommon rail pump and high pressure common rail injector. Have aHCR-200 test bench, the traditional user in repairing industry willbe the industry leader of repairing industry of dieselsystem.

 

1 USAGE
This test bench can test performance of common rail pump andcommon rail injector

 

2 HCR-200 can do the below test
Test the fuel metering unit’s performance, highest pressure,start pressure, pressure holding performance and efficiency. Testthe oil delivery pump’s oil suction pressure, oil supply pressure,internal pressure of pump body. It also can test the EDC-U2system(HP0) of DENSO.
Full-automatically test leakage, backflow, pilot injection,cranking , medium oil quantity, maximum load oil quantity,atomization quality, solenoid performance of common rail injectorsproduced by BOSCH, DENSO, DELPHI, SIEMENS, CATERPILLAR. Display thesolenoid’s fault state in real time. Do high pressure cleaning forcommon rail injector. 

 

3 Testable common rail pump BOSCH
BOSCH CP1/CP2/CP3/CB18 common rail pump DENSO
DENSO HP0/HP3/HP4 common rail pump 
DELPHI common rail pump
SIEMENS common rail pump
1800Bar The highest pressure is up to 1800Bar. 

 

4 test instrument
(1) Compulsory oil supply pressure gauge
(2) pressure gauge for oil delivery pump outlet
(3) oil suction pressure gauge for oil deliverypump
(4) internal pressure gauge

 

5 Drive system
(1) 3-phase 4-pole asynchronous motor
(2) AC frequency-changing driving
(3) shaft-coupling complies ISO4008/1 standard.
(4) Speed range: 0-3500RPM

 

6 Oil supply system
(1) oil supply pump: 0.75KW, 6L/MIN
(2) oil temperature adjuster: include temperature sensor,heater, radiator and filter (≤ 5μm).
(3) volume of oil tank: 50L
(4) Fuel type: ISO 4113

 

7 Display sizes;19 inches

8 Size of test bench length×width×height:1700×740×1500(mm)

 

 

 

HCR-200 high pressure common rail injector test bench